Masoud Dorfeshan

Faculty of   Engineering
Department of  Mechanical Engineering
 
Ph.D. Shahid Chamran University, Iran, 2018
MSc. Shahrood University of Technology, Iran, 2008
BSc. Shahid Chamran University, Iran, 2005
Email: Dorfeshan@bkatu.ac.ir
Phone Number: 061-52721191
Update: 2026/04/10

Faculty Member, Behbahan University of Technology, Behbahan, Iran, 2008-present.

ُSeparation

Drying

Two Phase Fow

Renewable Energy

Banooni, S., Hajidavalloo, E. and Dorfeshan, M., 2018. A comprehensive review on modeling of pneumatic and flash drying. Drying Technology, 36(1), pp.33-51.

 

Banooni, S., Hajidavalloo, E. and Dorfeshan, M., 2018. Experimental and numerical study of the effects of pre-drying of S-PVC using a pneumatic dryer. Powder Technology, 338, pp.220-232.

 

Dorfeshan, M., Mehrzad, S. and Hajidavalloo, E., 2022. Experimental and numerical investigation of specific energy consumption of the two-stage pneumatic-fluidized bed drying of suspension-grade polyvinyl chloride. Drying Technology, 40(2), pp.371-386.

 

Mehrzad, S., Jamaati, F. and Dorfeshan, M., 2023. Experimental investigation of operational E-PVC drying conditions on morphological properties of particles in a pilot-scale spray dryer. Chemical Engineering Communications, 210(1), pp.74-88.

 

Abaiebaghri, A.M., Tavassolpour, S., Noghrehabadi, A.R. and Dorfeshan, M., 2013. Double-diffusive natural convection in a porous enclosure heating from below and salting from top. American Journal of Advanced Scientific Research (AJASR), 1(7).

 

Dorostghol, A. and Dorfeshan, M., 2012. Intelligent fault diagnosis via EMD method. Journal of Applied Sciences, 12(18), pp.1960-1965.

 

Banooni, S., Hajidavalloo, E. and Dorfeshan, M., 2018. Analysis of specific energy consumption in S-PVC pneumatic drying.

Dorfeshan, M. and Hashemi Ma, S., 2011. Development of a cone vortex stabilizer to improve cyclone separator performance. Journal of Applied Sciences, 11(12), pp.2179-2185.

 

Masoud, D. and Shahidzade, M.S., 2011. A CFD study of the effect of vortex finder thickness on gas cyclone separator performance. Journal of Applied Sciences, 11(14), pp.2570-2577.

 

Shabani, M., Rakhshan, F., Dorfeshan, M. and Asgharipar, A., 2012. Efficiency Improvement of Neka Gas and Steam Power Plant Units with a Joint Project Involving Thermoelectric and Absorption Cooling Technology. Journal of Applied Sciences, 12(19), pp.2052-2058.

Banooni, S., Hajidavalloo, E. and Dorfeshan, M., 2018. A comprehensive review on modeling of pneumatic and flash drying. Drying Technology, 36(1), pp.33-51.

 

Banooni, S., Hajidavalloo, E. and Dorfeshan, M., 2018. Experimental and numerical study of the effects of pre-drying of S-PVC using a pneumatic dryer. Powder Technology, 338, pp.220-232.

 

Dorfeshan, M., Mehrzad, S. and Hajidavalloo, E., 2022. Experimental and numerical investigation of specific energy consumption of the two-stage pneumatic-fluidized bed drying of suspension-grade polyvinyl chloride. Drying Technology, 40(2), pp.371-386.

 

Mehrzad, S., Jamaati, F. and Dorfeshan, M., 2023. Experimental investigation of operational E-PVC drying conditions on morphological properties of particles in a pilot-scale spray dryer. Chemical Engineering Communications, 210(1), pp.74-88.

 

Abaiebaghri, A.M., Tavassolpour, S., Noghrehabadi, A.R. and Dorfeshan, M., 2013. Double-diffusive natural convection in a porous enclosure heating from below and salting from top. American Journal of Advanced Scientific Research (AJASR), 1(7).

 

Dorostghol, A. and Dorfeshan, M., 2012. Intelligent fault diagnosis via EMD method. Journal of Applied Sciences, 12(18), pp.1960-1965.

 

Banooni, S., Hajidavalloo, E. and Dorfeshan, M., 2018. Analysis of specific energy consumption in S-PVC pneumatic drying.

Dorfeshan, M. and Hashemi Ma, S., 2011. Development of a cone vortex stabilizer to improve cyclone separator performance. Journal of Applied Sciences, 11(12), pp.2179-2185.

 

Masoud, D. and Shahidzade, M.S., 2011. A CFD study of the effect of vortex finder thickness on gas cyclone separator performance. Journal of Applied Sciences, 11(14), pp.2570-2577.

 

Shabani, M., Rakhshan, F., Dorfeshan, M. and Asgharipar, A., 2012. Efficiency Improvement of Neka Gas and Steam Power Plant Units with a Joint Project Involving Thermoelectric and Absorption Cooling Technology. Journal of Applied Sciences, 12(19), pp.2052-2058.

 

Alghorayshi, S.T.K., Rezapouranghahfarokhi, A., Abolhasani, E., Dorfeshan, M., Imandoust, M., Ayoubi, S. and Zahedi, R., 2026. Prioritizing Fuel Cell Performance: A Developed AHP-Based MCDM for Fuel Cell Selection. Arabian Journal for Science and Engineering, pp.1-15.

Yousefi, H., Dorfeshan, M., Dorfeshan, M. and Zahedi, R., 2026. CFD-based numerical investigation of solar chimney effect on urban air pollution and AQI reduction: A case study of Tehran. Environmental Monitoring and Assessment, 198(2), p.131.

Alghorayshi, S.T.K., Rezapouranghahfarokhi, A., Abolhasani, E., Dorfeshan, M., Imandoust, M., Ayoubi, S. and Zahedi, R., 2025. Optimizing fuel cell selection: an AHP-driven multi-criteria framework. Fuel Communications, p.100153.

Parvaz, F., Dorfeshan, M. and Nikbakht Naserabad, S., 2026. Gas Cyclone Performance Prediction: A State-of-the-Art Review of Theoretical Modeling Approaches. Journal of Heat and Mass Transfer Research, 13(1), pp.43-72.

Parvaz, F., Nikbakht Naserabad, S., Dehdarinejad, E. and Dorfeshan, M., 2026. The Impact of Vortex Finder Changing on Gas-Oil Separator Performance. Journal of Heat and Mass Transfer Research.

Dorfeshan, M., Bigdeli, A. and Kojabad, M.E., 2025. Factors affecting the improvement of solar desalination efficiency in Iran, a review study. Journal of Renewable and New Energy, 12(2), pp.106-117.

Motaghed, S., Eftekhari, N., Fakhriyat, A.R., Mahmoodian, H. and Dorfeshan, M., 2025. Detailed seismic risk assessment of a blast-resistant concrete building. International Journal of Reliability, Risk and Safety: Theory and Application, 8(2), pp.11-21.

Dorfeshan, M., Ahmadianfar, I. and Samadi-Koucheksaree, A., 2025. Forecasting Water Quality Parameter Using a Novel Kernel-Based Method with Feature Selection and Multivariate Decomposition. Journal of Water and Soil Conservation, 32(1), pp.106-127.

درفشان, ستوده and درفشان, 2025. مدل‌سازی و مقایسۀ اثر زبری سطوح شیرهای توپی و پروانه‌ای در ایجاد کاویتاسیون و هدررفت انرژی در شبکۀ گازرسانی کشور. فصلنامه سیستم های انرژی پایدار, 4(2), pp.139-155.‎

Dorfeshan, M., Samipour, H.R. and Elyasi Kojabad, M., 2025. Assessment of Airborne Contaminants and the Washing Through Effect on Performance Degradation and Corrosion of V94. 2 Gas Turbines in Behbahan CCPP. Journal of sustainable Energy Systems, 4(1), pp.107-122.

Dorfeshan, M., Sotoudeh, S. and Parvasi, P., 2025. Numerical analysis of gas flow in industrial valves for mitigating cavitation effects in the national gas distribution network.

Dorfeshan, M., Sotoudeh, S. and Dorfeshan, M., 2025. Modeling and Comparison of the Effect of Surface Roughness in Ball and Butterfly Valves on Cavitation Formation and Energy Loss in the National Gas Distribution Network.

Dorfeshan, M., Moghaddam, S. and Parvaz, F., 2024. The Impression of Roughness on Flow Pattern and Performance of Axial Gas Cyclone Along with Erosion Rate. Journal of Gas Technology, 9(2), pp.70-87.

Elyasi Kojabad, M., Amirabedi, P. and Dorfeshan, M., 2024. Enhanced CO2 Separation Using Pebax Membrane Modified with Ethylene Glycol Monophenyl Ether. Journal of Gas Technology, 9(2), pp.28-38.

Amirabedi, P., Elyasi, K.M., Raveshiyan, S. and Dorfeshan, M., 2024. The Effect of Hydrophobic Nanoparticles on the Performance of Poly (vinyl chloride) Hollow Fiber Membrane Contactors for . CO2 Absorption. Iranian Journal of Polymer Science and Technology, IJPST . 37(4)

Elyasi Kojabad, M., Amirabedi, P. and Dorfeshan, M., 2024. Two-way facilitated transport membrane for CO2 separation with synergy of nucleophilic addition and π-complexing reactions: Molecular simulation and experimental study. Iranian Journal of Polymer Science and Technology, 36(6), pp.669-682

Amirabedi, P. and Dorfeshan, M., 2023. Techno-Economic Evaluation Evaluation of Heat Recovery from the Chimney of the Furnaces of the Dehumidification Unit of Bidboland Gas Refinery Using the Organic Rankine Cycle. Iranian Journal of Gas Engineering, 10(2), pp.29-41.

 

 

مقالات ارائه شده در کنفرانس‎های داخلی و خارجی

جماعتی، ف.، درفشان، م.، و مهرزاد، س. (۱۳۹۹). مطالعه عددی اثر فاکتورهای عملیاتی بر سینتیک خشک شدن پودر پی‌وی‌سی امولسیون در خشک‌کن پاششی. ششمین کنفرانس ملی پژوهش‌های کاربردی در مهندسی برق، مکانیک و مکاترونیک، دانشگاه صنعتی مالک اشتر، تهران.

۲. درفشان، م. (۱۴۰۰). بررسی قابلیت‌های سیکلون درایر به‌عنوان یک گزینه جایگزین جهت استفاده در صنعت پتروشیمی. چهارمین کنفرانس ملی مکانیک محاسباتی و تجربی، دانشگاه شهید رجایی، تهران.

۳. فولادی، ک.، و درفشان، م. (۱۴۰۳). تصفیه‌خانه فاضلاب شهر دوگنبدان و بررسی عملکرد آن. هشتمین کنفرانس ملی پژوهش‌های کاربردی در مهندسی برق، مکانیک و مکاترونیک، دانشگاه ادیبان با همکاری انجمن فناوری‌های بومی ایران، تهران.

۴. درفشان، م.، مهرزاد، س.، و درفشان، م. (۱۳۹۹). تحلیل عددی فرآیند خشک شدن پی‌وی‌سی سوسپانسیون در خشک‌کن بستر سیال پیوسته. ششمین کنفرانس ملی پژوهش‌های کاربردی در مهندسی برق، مکانیک و مکاترونیک، دانشگاه صنعتی مالک اشتر، تهران.

۵. درفشان، م. (۱۴۰۰). ارزیابی فنی و تعیین اولویت‌های پژوهشی در صنایع پتروشیمی به روش AHP. سومین کنفرانس بین‌المللی فناوری‌های جدید در صنایع نفت، گاز و پتروشیمی، دانشگاه تهران، تهران.

۶. درفشان، م. (۱۴۰۰). تحلیل ارزیابی ریسک تجهیزات در صنایع پتروشیمی به روش FMEA. سومین کنفرانس بین‌المللی فناوری‌های جدید در صنایع نفت، گاز و پتروشیمی، دانشگاه تهران، تهران.

۷. درفشان، م. (۱۴۰۰). پتانسیل سیکل رانکین ارگانیک در بازیافت حرارت اتلافی در صنعت. سومین کنفرانس بین‌المللی فناوری‌های جدید در صنایع نفت، گاز و پتروشیمی، دانشگاه تهران، تهران.

۸. مزارعی، ح.، و درفشان، م. (۱۴۰۳). فاکتورهای مهم در پیش‌راه‌اندازی خط لوله نفت و گاز. هشتمین کنفرانس ملی پژوهش‌های کاربردی در مهندسی برق، مکانیک و مکاترونیک، دانشگاه ادیبان با همکاری انجمن فناوری‌های بومی ایران، تهران.

۹. هدایت‌نیا، م.، و درفشان، م. (۱۴۰۳). هوشمندسازی، کنترل و پایش الکتروپمپ‌ها، تابلوهای برق تأسیسات آبرسانی حوزه روستایی آبفا بهبهان. هشتمین کنفرانس ملی پژوهش‌های کاربردی در مهندسی برق، مکانیک و مکاترونیک، دانشگاه ادیبان با همکاری انجمن فناوری‌های بومی ایران، تهران.

۱۰. بختیارزاده، ح.، و درفشان، م. (۱۴۰۳). بررسی عملکرد کوره زباله‌سوز پتروشیمی کارون. هشتمین کنفرانس ملی پژوهش‌های کاربردی در مهندسی برق، مکانیک و مکاترونیک، دانشگاه ادیبان با همکاری انجمن فناوری‌های بومی ایران، تهران.

۱۱. خندانی، ح.، و درفشان، م. (۱۴۰۳). ارزیابی قابلیت اطمینان پارامتری موتورهای الکتریکی. هفتمین همایش ملی فناوری‌های نوین در مهندسی برق، کامپیوتر و مکانیک ایران، مجتمع آموزش عالی بم و مرکز بین‌المللی علوم جهان اسلام، تهران.

۱۲. احمدپور، م. م.، و درفشان، م. (۱۴۰۳). بررسی انواع روغن‌های عایق و مخلوط آن‌ها به‌عنوان یک جایگزین برای روغن معدنی در خنک‌کننده‌های ترانسفورماتورهای قدرت. هفتمین همایش ملی فناوری‌های نوین در مهندسی برق، کامپیوتر و مکانیک ایران، مجتمع آموزش عالی بم و مرکز بین‌المللی علوم جهان اسلام، تهران.

۱۳. نظری، ع.، و درفشان، م. (۱۴۰۳). جابه‌جایی میعانات بخار آب از جداکننده‌های تبخیر ناگهانی بدون استفاده از پمپ به چرخه واحدهای صنعتی. هفتمین همایش ملی فناوری‌های نوین در مهندسی برق، کامپیوتر و مکانیک ایران، مجتمع آموزش عالی بم و مرکز بین‌المللی علوم جهان اسلام، تهران.

۱۴. خدری، ذ.، و درفشان، م. (۱۴۰۳). روش‌های بهبود راندمان توربین گازی با خنک‌کاری هوای ورودی. پنجمین کنفرانس بین‌المللی فناوری‌های جدید در صنایع نفت، گاز و پتروشیمی، انجمن مهندسی گاز ایران، تهران.

۱۵. جان‌فزا، ن.، و درفشان، م. (۱۴۰۳). بررسی سیکل رانکین و طراحی و بهینه‌سازی مبدل‌های حرارتی برای چرخه‌های رانکین آلی. پنجمین کنفرانس بین‌المللی فناوری‌های جدید در صنایع نفت، گاز و پتروشیمی، انجمن مهندسی گاز ایران، تهران.

 

کتاب:

Dorfeshan, M. and Mehrzad, S., 2023. Pneumatic and flash drying. In Particulate Drying (pp. 47-61). CRC Press.

 

Dorfeshan, M. and Mehrzad, S., 2023. Pneumatic dryers. In Drying Technology in Food Processing (pp. 157-173). Woodhead Publishing.

  • Rank 1 among graduate students of Mechanical Engineering (Energy Conversion) at Shahrood University of Technology.
6.1.8.0
گروه دورانV6.1.8.0